Iphaneli yoDonga yoBugcisa ye-MS28 I-MS POLYMER ADHESIVE / SEALANT Umfanekiso obonisiweyo

Iphaneli yoDonga yoBungcali ye-MS28 I-MS POLYMER ADHESIVE / SEALANT

Inkcazo emfutshane:

Iphaneli yoDonga yobuNgcali yeMS28 I-MS Adhesive yi-modulus ene-single-component, ephakathi-phezulu, i-polyether-modified silane adhesive ephilisa ubushushu begumbi, enika ukubopha okuqinileyo nokuqina kwizinto eziqhelekileyo. Ayinavumba, i-VOC ephantsi, ayingcolisi, ayinciphi, kwaye inokumelana nokwaluphala okuhle kakhulu.

Yongeza:NO.1, INDAWO A, IPAKI YOSHISHINO LONGFU, I-LONGFU DA DAO, IDOLOPHU YASE-LONGFU, I-SIHUI, I-GUANGDONG, ETSHAYINA

Ucingo:0086-20-38850236

Ifeksi:0086-20-38850478

Thumela i-imeyile kuthi THETHA NGOKU

Iinkcukacha zeMveliso

Iithegi zeMveliso

Izicelo eziphambili

Ifanelekile ukufakwa:
1. Iibhokisi zeengcango neefestile, izinyuko kunye nee-treads, ii-baseboards, ii-waistlines zodonga, imigca ye-gypsum, imihombiso yeepaneli, izinto zokuhombisa ezinemilo ekhethekileyo, kunye namatye ahlukeneyo.
Ukubopha izinto ezifunxayo nezingafunxiyo:

Zonke iintlobo zeepaneli zomthi, iimveliso zeseramikhi, isinyithi, ikhonkrithi, ilitye, njl.

Ukubopha kwiiplate ezithile:

Izipili, iziphatho, iiphaneli zekristale, imabula, kunye nezinye iipleyiti.

Imiyalelo yokwakha

1. Ukucocwa komphezulu

Coca umphezulu wezinto ezibotshelelweyo okanye ezigqunyiweyo kakuhle, uze ususe umhlwa, uthuli, amabala eoyile, njl.

2. Isicelo sokuncamathelisa

· Khulula (okanye usike) isiciko setyhubhu yokuncamathelisa.
· Cinezela iglu kumphezulu ocociweyo, uqinisekise ukuba isasazwa ngokulinganayo, uze uvale kwaye ulungise iindawo ezibotshelelweyo.

3. Inkqubo yokunyanga

· Beka izinto ezibotshelelweyo okanye ezivaliweyo emoyeni ukuze zinyangeke ngokwendalo. Inkqubo yokunyangwa iqala ukusuka phezulu ukuya ngaphakathi.
· Kwiiyure ezingama-24 (kubushushu begumbi kunye nomswakama ongama-55%), iglu iya kuphola ifikelele kubunzulu obuyi-2–4 mm.
· Kwizicelo ezinzulu, ingakumbi kwiindawo ezinomoya omncinci, ixesha elipheleleyo lokunyanga liya kwanda. Amaqondo obushushu aphantsi aya kwandisa ixesha lokunyanga.
· Ngaphambi kokuba uqhubeke nokucubungula okanye ukupakisha izinto ezibotshelelweyo, kucetyiswa ukuba ulinde ixesha elide ngokwaneleyo ukuqinisekisa ukuba amandla kunye nokuthembeka kwebhondi akuchaphazeleki.

Idatha yoBugcisa

	Isalathisi sokusebenza	Amaxabiso aqhelekileyo	Imigangatho yemigangatho
Ngaphambi kokuba Uphiliswe	Inkangeleko	Intlama emhlophe/emnyama
	Uxinano (g/cMS28)	1.6±0.05	GB/T 13477.2
	Ixesha lokuhlawula i-tack (min, 25℃)	10~60	GB/T 13477.5
	Uhlobo lokunyanga	into enye	-
Emva kokuPhila	Ubunzima (uLwandle A)	50±5	GB/T 531.1
	Amandla okuxinana (MPa)	1.7±0.2	GB/T 528
	Ukwandiswa kokutsalwa ngexesha lokuphumla (%)	200~500	GB/T 528
	Amandla okucheba (MPa) AL/AL	≥1.5	GB/T 7124
	Ubushushu bokusebenza (℃)	－40℃～＋70℃	-

Qaphela: Yonke idatha yokusebenza engentla ilinganiswa emva kokunyibilika iintsuku ezisi-7 kwi-25℃ kunye nomswakama ongama-55%.

Iinkcukacha zokuPakisha

• 300ML/ityhubhu, iityhubhu ezingama-24/ibhokisi
• 590ML/ityhubhu, iityhubhu ezingama-20/ibhokisi

Ukulumkela

1. Emva kokusebenza, qinisa ngoko nangoko isigqubuthelo seglue engasetyenziswanga uze uyigcine ivaliwe

2. Xa usebenzisa kwakhona, ukuba kukho ulusu oluncinci kwindawo yokutywina, yisuse, nto leyo engayi kuchaphazela ukusetyenziswa kwesiqhelo.

3. Ngexesha lokugcina, kunokwenzeka ukuba kubekho ukunyibilika okuncinci kwindawo evulekileyo yombhobho. Emva kokuyisusa, imveliso ingasetyenziswa ngokuqhelekileyo ngaphandle kokuphazamisa ukusebenza kwayo.

Indawo yokugcina izinto kunye nokuThuthwa

Iimeko Zokugcina
1. Imveliso mayigcinwe kwindawo epholileyo neyomileyo engaphantsi kwama-35℃. Ixesha lokugcinwa kwayo ziinyanga ezili-9 xa igcinwe ngaphantsi kwama-25℃.
Uthutho