I-OLVS188 i-Acetic High Temperature Resistant Silicone Sealant Featured Featured Image

I-OLVS188 i-Acetic yoBubushushu obuPhakamileyo obuxhathisa iSilicone seSialant

Inkcazelo emfutshane:

I-TEMP RESISTANCE YESILICONE SEALANT ELIPHEZULU yinxalenye enye, injongo ngokubanzi i-acetic silicone sealant, ekwaziyo ukumelana nobushushu obuphezulu ukuya kuthi ga kwi-343 ° C. Inobuchwephesha bokungangeni manzi, ubuchule bokulwa neebhaktheriya kunye nokubambelela kakuhle ngobuninzi bezinto zokwakha kunye nenjini.

Umbala:Bomvu

Thumela i-imeyile kuthi THETHA NGOKU

Iinkcukacha zeMveliso

Iithegi zeMveliso

Iimpawu

1. I-acetic ephilisiwe, i-RTV, icandelo elinye;
2. Kulula ukuyisebenzisa, ukunyanga ngokukhawuleza;
3. Ukuchasana okugqwesileyo ngamanzi, imozulu;
4. Ukuchasana okugqwesileyo kunye nobushushu obukhulu obuguqukayo ukusuka kwi -20 ° C ukuya kwi-343 ° C;
5. Ubuninzi: 1.01g/cm³;
6. Ixesha le-Tack-Free: 3 ~ 6min; Extrusion: 600ml / min.

Ukusetyenziswa okuqhelekileyo

1. Iimeko zobushushu obuphezulu, ezifana nezakhelo zeziko.
2. Amalungu e-sealant phakathi kwezinto ezininzi ezingekho-porous ezifana neglasi, i-aluminium, isinyithi kunye ne-alloys zetsimbi.
3. Usetyenziso oluqhelekileyo oluquka iinxalenye zenjini yokutywina, igasket, iigiya kunye nezixhobo zombane.

Isicelo

1. Coca ngee-solvents ezifana ne-toluene okanye i-acetone ukugcina i-substrate icocekile kwaye yomile;
2. Ukufumana inkangeleko engcono igqume ngaphandle kweendawo ezidityanisiweyo ngeempompo zokugquma phambi kokufakwa kwesicelo;
3. Sika i-nozzle kwisayizi oyifunayo kwaye ukhuphe i-sealant kwiindawo ezidibeneyo;
4. Isixhobo ngokukhawuleza emva kokufakwa kwe-sealant kwaye ususe i-masking tape phambi kwezikhumba zokutywinwa.

Ukulinganiselwa

1. Ayifanelanga ukuncamathelisa kolwakhiwo lwamakhethini;
2. Ayifanelekanga indawo yomoya, kuba iyadingeka ukufunxa umswakama emoyeni ukunyanga i-sealant;
3. Ayifanelekanga kwindawo eneqabaka okanye efumileyo;
4. Ayifanelekanga indawo ehlala imanzi;
5. Ayinakusetyenziswa ukuba iqondo lobushushu lingaphantsi kwe-4℃ okanye ngaphezulu kwe-50℃kumphezulu wezinto.

Beka ubomi kwishelufa

Iinyanga ezili-12 ukuba hlala utywina, kwaye ugcinwe ngaphantsi kwe-27℃ kwindawo epholileyo, eyomileyo emva komhla wemveliso.

Umthamo: 300ml

Icwecwe leDatha yobuGcisa (TDS)

Le datha ilandelayo yenzelwe injongo yereferensi kuphela, ayenzelwanga ukusetyenziswa ekulungiseleleni iinkcukacha.

Ubushushu obuphezulu be-Acetic Ukunyanga ngokukhawuleza iSilicone Sealant
Ukusebenza		Umgangatho	Ixabiso elilinganiselweyo	Indlela yoVavanyo
Uvavanyo kwi-50±5% RH kunye nobushushu obungama-23±2⁰C:
Ubuninzi (g/cm³)		±0.1	1.02	GB/T13477
Ixesha lokuSima ngesikhumba (min)		≤180	3~6	GB/T13477
Ukuchacha okuthambileyo (%)		≥80	90	GB/T13477
Extrusion (ml/min)		≥80	600	GB/T13477
I-Tensile Modulus (Mpa)	23⁰C	≤0.4	0.35	GB/T13477
	–20⁰C	/	/
Ukutyibilika (mm) ngokuthe nkqo		≤3	0	GB/T 13477
Ukutyibilika (mm) ngokuthe tye		ayitshintshi imilo	ayitshintshi imilo	GB/T 13477
Isantya sokuphilisa (mm/d)		≥2	5	GB/T 13477
Njengoko Unyangwa -Emva kweentsuku ezingama-21 kwi-50±5% RH kunye nobushushu obungama-23±2⁰C:
Ukuqina (Unxweme A)		20-60	35	GB/T531
Ukwandiswa koKukrazuka (%)		/	/	/
Amandla okuqina phantsi kweeMeko eziMgangatho (Mpa)		/	/	/
Ukukwazi ukushukuma (%)		12.5	12.5	GB/T13477
Ugcino		Iinyanga ezili-12